Demolition Pemutar poros

Demolition
Before performing the demolition do the initial screening with
following steps:
     a. Loosen the wheel nuts
     b. Car jack and jack stand pivot with
     c. Remove the wheels and drum
     d. Examination of freedom axial direction, maximum freedom is 1mm.
  By using a dial indicator.
If freedom is too large and typically replace bearing pads that are too large freedom will be heard the roar of a car during walking.
Note:
If the damaged wheel bearings should be replaced immediately, otherwise it will cause:
       1. The danger of braking
       2. Wheel bearings can be broken or burnt
       3. Restrain wasteful fuel consumption
Disassembly and examination are as follows:
         a. Loosen the wheel nuts.
         b. Lift car with a jack and jack stand with pivot.
         c. Remove the wheel and brake.
         d. Remove the bolt fastener backing plate and brake pipes using the SST.
How To Remove
e. By using the SST off the rear axle Aksel, heart-
         careful not to damage the oil seals.
f. Remove the rear axle gasket.